CategoryGraphite News

How To Use Solar Energy At Home

Few people know how to maximize their use of solar power. Thankfully, a bit of education will turn you into a master. Continue reading for such knowledge.

When using solar energy for the first time, it’s probably a good idea to start out small. Choose a few lights to put in your front yard until you realize the benefits of solar energy. You can find them at various home improvements stores and large retailers. Install them along your walkway for lighting.

Find solar panels that maximize energy to save money in the long run. Newer systems can store energy from the sun while it is up, and then let you use that energy later. Since we all use electricity 24 hours a day, this is essential.

You need to find a reliable way to store your energy after it is produced by your solar energy system. You may want to get a battery that stores the energy or sell it to the electric company.

If your solar panels should fail, you need to have a backup plan in place. Generators are a good idea, though you might also stay connected to a main grid so that you can access power when necessary. If you purchase a generator, be sure you regularly test it, and you may wish to have more than one unit.

Just because you live in an area that is cold doesn’t mean you can’t have solar power to keep you warm and run your house. The temperature is irrelevant as long as your panels are safe and they are getting proper sunlight. In all conditions, your solar panels can significantly benefit your home.

Don’t let a salesman sell you anything. You must spend sufficient time gathering information if you are to make a smart decision. You may make a horrible decision and lose out on a lot of money by purchasing from a pushy salesperson.

A solar power system will save you money if you prepare for it to be a long term investment. Solar panels require an initial investment and may tale a while before they pay for themselves. This project is best postponed until you are sure you are not going anywhere.

Do a careful estimation of your energy usage needs and how many panels you will need with someone who knows all of the points to consider. In some parts of the country, you may have to pay far too much for the combined output and overhead. If you rush into purchasing a solar power system, you may be unpleasantly surprised.

You can reduce the amount you spend on electricity by using solar panels or installing a solar water heater. If an area of your home is exposed to a minimum of five hours of direct sunlight, a photovoltaic panel system might work well for you. By using solar water heating, you can heat a swimming pool for cheaper.

Solar Energy

Don’t waste your time with pushy salespeople. It’s important to carefully review all the options to make the best decision. Buying immediately from any high pressure salesperson may result in making the wrong decision and wasting your money.

Solar energy has great potential in benefiting a broad range of the population. That said, many people don’t know what solar energy can offer. With any luck, now that you have digested the preceding information, you are no longer one of them, and have what it takes to explore solar energy for yourself.

Please follow and like us:

Conserving Fossil Fuels By Choosing Green Energy

You can protect the environment and reduce energy costs with green energy. You don’t need an electric car for this. Read this article for some simple ways to make your home more energy efficient on any budget.

Furnace filters should be replaced annually, and check them monthly for cleanliness. Also install filters on air registers. This will keep everything out of the air ducts, keeping your energy efficiency high.

If you use fuel oil to heat your home, a technician can give you information about changing over to biodiesel. Many systems will take a switch to some level of biodiesel without any extra parts or modifications. Biodiesel runs more efficiently, burns more clean, and costs you less during the winter.

The are several simple techniques to conserve energy. Unplug appliances that are not being used. When you are no longer using them, turn off lights and the television. This simple tip will save you money as well.

TIP! If you’re not using an appliance, turn it off. Upon leaving a room, turn off such things as the lights, computer, television or entertainment center.

Cover your windows when you are away from home. This will help save energy. This cools your home’s interior and keeps energy usage down while you’re away. South facing windows will receive the most sun, and therefore heat. Use coverings on each of your home’s windows, such as roman shades, dark curtains, or roller shades.

One way to be environmentally friendly is to only run the dishwasher when it is completely full. Don’t run it with just a few dishes. Pack your dishwasher full, and you may be surprised at the amount it can hold. Take care to line up your dishes, so you are able to put in as many as you can.

Passive Energy

The flow of air in a home is better controlled when you have stormed windows and doors installed. This is because storm windows and doors prevent drafts, which means less cold air enters the home. Your home’s energy efficiency will increase by as much as 45% if you install storm windows and doors!

TIP! An easy way to cut energy costs and go green is to dress warm. 2 degrees of warmth is added by wearing a light sweater, and 4 degrees with a heavy one.

Learn all you can about solar power that is active and passive. Using active power means storing energy for later use, while passive energy is about benefiting from the warmth or light of the sun rays right away. If you use active power, you will need to install mechanical systems, solar panels and cells. Passive energy is using the sun’s thermal energy to heat your house.

Look for federal and local rebates that apply to renewable energy at home. Sometimes, your local utility company can give you a rebate based on what the upgrades cost. You may also qualify for tax credits or deductions from your state or from the federal government. The combination of rebates and tax credits will make it much more affordable to install green energy systems.

Changing your furnace filter, using light bulbs which are energy efficient and using an energy efficient thermostat are all easy steps you can take to reduce energy use. Show your family how simple it is to live a green lifestyle, and maybe they’ll follow suit! Keep these tips in mind and use them.

If you are interested in solar power learn about the difference between active and passive power. While active power requires storage cells, passive power doesn’t. You need to install solar panels and systems if you want active solar power. Passive power, instead, just stores the energy gotten from the sun inside your home.

TIP! Have the bulk of your correspondence sent to your email. Eliminate as much paper from companies as you can.

Please follow and like us:

Green Energy Tips That Truly Make A Difference

It probably seems like a hassle to go green, but it’s much more simple than you think. Any changes you make, big or small, will still benefit the earth. You are about to read advice to assist you in turning green.

There are numerous grants available for home owners to increase the use of renewable energy. Ask your local authorities what kinds of programs are available in your area. For instance, you might find that installation of wind or solar structures is free, or you might see a tax benefit by installing a tankless water heater.

TIP! Keeping your windows shaded to keep sunlight out of the house will greatly conserve energy. You could also try putting in curtains or blinds.

Use windows covering for when you’re not home. You will lower your energy costs since this will help keep your home nice and cool. Typically, windows that face south are positioned so that they receive the most sun. Dark drapes, or even energy-efficient lined drapes, are your best bet.

Only using the dishwasher when it is full will save you money and energy. If you only have a couple of dishes, do not put them in the dishwasher and turn it on. Pack your dishwasher full, and you may be surprised at the amount it can hold. Make sure you take time to place the dishes in properly so as to maximize the space available.

TIP! Be socially responsible, and unplug electric chargers for all devices that don’t need immediate charging. Even if you are not charging your laptop, cell phone or mp3 player, just having it plugged in uses energy.

Don’t leave appliances that aren’t in use, on. When you leave a room, take the time to turn off lights, the tv or the computer. A power strip offers a handy way to shut down multiple devices at once, and it prevents passive electrical use due to standby modes.

If you utilize a dishwasher, avoiding using it until it’s filled up. The dishwasher uses the same energy when full that it uses when empty, but you’ll have to run it less often. When you run a dishwasher, use the ‘energy-saver’ setting so dishes can air-dry.

TIP! When you can, wash your laundry in cold water. Almost 90% of the energy you use when you do laundry is due to heating water.

When you calculate the solar panel needs of your home, figure out the hours of sun you get in the winter. This will ensure that you are not caught short during winter, and you have excess during the summer. Be sure to get a net-usage plan with the energy company so that you can get money from them when you put the surplus energy onto their grid.

If you want to live greener and have a greener home, avoid running electric heaters during the winter. Wrap up your family in warmer clothes and make use of your fireplace for added warmth. This is good for your health as well as your electric bill. Breathing cooler air at night helps keep your respiratory system healthy; you’ll avoid drying out your airways.

TIP! If you aren’t home, use a window covering. This keeps your home cooler naturally, reducing the strain on your air conditioner and saving energy.

Changing to greener ways does not need to be difficult. As you have seen in this article, there are many ways to become more green. Make sure you use the tips you have just read. Although the effort isn’t considerable, going green does have some tremendously great effects.

Please follow and like us:

Tubular graphite half-water gas cooler (3)

1, graphite heat exchanger in the gas cooling operation
We tried to apply graphite tube heat exchanger to semi-water gas cooling. All week
Know that in the hot summer, a substantial reduction in ammonia production, ammonia production has a serious negative impact. To lessen this impact, we utilize a factory-wide shut-down and maintenance machine with a graphite tube gas cooler in front of the compressor. Its main purpose is to reduce the gas temperature, increase the compressor effective air delivery, and ultimately increase the production of synthetic ammonia.

2, the focus of the cooler installation and key mechanisms
(1) The thermal conductivity of graphite material is good, the thermal conductivity is 2.5 times of that of carbon steel, the graphite material tube is used to strengthen the heat exchange, and the selected heat transfer area is 700m2.
(2) Taking into account the average summer gas temperature of 46 ℃, so the use of a lower temperature water (temperature is about 27 ℃) for gas cooling and heat exchange, and the export of a water recharge cycle use.
(3) Although the thermal conductivity of graphite is good, the convective heat transfer coefficient of cold-side fluid and hot-side fluid greatly affects the heat transfer effect. Therefore, countercurrent heat exchange is used and the number of water side baffles is increased to enhance the convective heat transfer.
(4) In the cooler at the bottom of the gas-water separation device, which can effectively prevent the gas into the compressor with water.

3, cooler operation evaluation related parameter records
a, gas temperature before cooling: an average of 39.2 ℃
b, after cooling gas temperature: an average of 31.4 ℃
c, the average daily water consumption: 500m3
d, gas pressure drop: 500Pa

Please follow and like us:

Tubular graphite half-water gas cooler (2)

Tubular graphite half-water gas cooler (2)

3, product application analysis:
In the ammonia production process, always accompanied by the occurrence of heat exchange. The pros and cons of this type graphite heat exchanger performance directly determines whether the ammonia synthesis system can operate economically. It is based on this, new materials, high-performance heat exchanger technology is also gradually penetrated to the industrial production of ammonia, and increasingly show its tremendous role.
Due to various reasons, many of our small nitrogen fertilizer companies, the traditional heat transfer technology is still dominant. It is an obstacle to the production of synthetic ammonia based on energy conservation and consumption reduction. At present, some manufacturers also try to use a mixed spray and spray-based heat exchanger, such heat exchangers exist a series of problems such as high power consumption, the loss of effective gas composition, gas and water separation difficulties. After careful comparison, research and demonstration, our company boldly tried to apply the new graphite tube heat exchanger to the production system and achieved good results.

Please follow and like us:

Tubular graphite half-water gas cooler (1)

Tubular graphite half-water gas cooler (1)

1, the structural features: This graphite heat exchanger is my company for the ammonia industry to compress a period of semi-water gas cooling section design. Equipment cylinder and head with carbon steel corrosion, carbon steel tube plate, heat pipe modified phenolic resin-type graphite tube, pipe and tube plate using my company’s patented composite structure, single tube seal, reliable performance, Easy maintenance. Heat exchange tube model: φ30 / φ20, φ32 / φ22, φ37 / φ25.

2, the design parameters: Design pressure: 0.6 MPa
Design temperature: -20 ~ 165 ℃
Heat transfer area: 10 ~ 3000 ㎡

Please follow and like us:

Patented combination of tubular graphite heat exchanger (2)

Patented combination of tubular graphite heat exchanger (2)

3, product description:
1, The equipment adopts the patented technology of our company, the tube and the tube plate are connected as elastic seal, the graphite tube is flexible and retractable under temperature difference stress, which effectively avoids the stress destruction caused by the temperature difference stress between the graphite tube and the tube plate bonding structure;
2, the equipment can be replaced by a single tube, interchangeability of parts, maintenance and cleaning convenience;
3, the value in the table calculated in accordance with φ32 / 22 graphite tube diameter;
4, the company based on the customer request for the design and manufacture of 450 ㎡ above the heat exchanger;
5, I type for the ordinary heat exchanger, II type condenser with gas-liquid separator.
6, the device can be used as a condenser, cooler, heater, falling film absorber, reboiler and so on.

Please follow and like us:

Patented combination of tubular graphite heat exchanger (1)

Patented combination of tubular graphite heat exchanger (1)

1, the structural features:
This product is a patented product independently developed by our company. Equipment cylinder and head with carbon steel corrosion, tube board impregnated graphite, heat exchange tubes for the modified phenolic resin-type graphite tube, tube and tube plate between the company’s flexible seal composite structure, single-tube seal, reliable performance Easy to maintain.
Heat exchange tube model: φ30 / φ20, φ32 / φ22, φ37 / φ25, φ50 / φ36.

2, the design parameters: Design pressure: 1.0 MPa
Design temperature: -20 ~ 165 ℃
Heat transfer area: 10 ~ 1500 ㎡

Please follow and like us:

Our main production equipments of Graphite Heat Exchanger

Our main production equipments of Graphite Heat Exchanger as follows:

1, CNC drilling machine special: 5 units.

2, CNC vertical lathe: 3 units.

3, manual dedicated drilling machine: 3 units.

4,3050 Rocker drill: 3 sets.

5,20 Lathe: 2 sets.

6,30 lathe: 1 Taiwan.

7, ordinary car: 1 Taiwan.

8, NC dedicated car graphite tube lathe: 1 Taiwan.

9, phenolic resin production system: 2 sets.

10, resin impregnation system: 3 sets.

Please follow and like us:

Our production capacity of Graphite heat exchanger

Our Graphite Heat Exchanger Production capacity:

1, round hole graphite heat exchanger: 30000㎡ / year

2, tube graphite heat exchanger: 60000㎡ / year

3, graphite tower equipment: 100 / year

4, graphite lining: 10000 ㎡ / year

5, patented combination of tubular graphite heat exchanger: a single maximum heat transfer area of 3000 square meters

6, floating head tubular graphite heat exchanger: a single maximum heat transfer area of 1500 square meters

7, round hole graphite heat exchanger: a single maximum heat transfer area of 800 square meters

8, graphite tower equipment: diameter less than 2000

9, graphite lining: less than 5000 in diameter

Please follow and like us: